- The gas burner broke and the work stopped.
- Repairing a gas burner requires only 3 skills
- If it’s such a difficult technology.
- When you think your gas cutting burner is broken
- Grating the valves
- Grating of needle valve
- silver brazing
- Soldering
- Do you think it’s difficult?
- Think about how you were able to do gas cutting before.
- Psychological
- Legal inspection of gas burner
- You’re making money off of such a simple thing!
The gas burner broke and the work stopped.
Have you ever had this experience?
Do I have to buy a new one?
Or do I have to send it in for repair?
If so, this is a must-see.
Repairing a gas burner requires only 3 skills
Isn’t it quite difficult to do?
What do you think?
To repair a gas burner, you only need to know three things!
If you can repair a gas burner
If you can repair a gas burner, repairing a gas gauge is
If you can repair a gas burner, repairing a gas gauge is much less difficult and easy.
If it’s such a difficult technology.
What if repairing a gas burner is
If repairing gas burners is so difficult
If repairing gas burners is so difficult, there is no way I can make a living doing it.
If you are a full-time repairer
A full-time craftsman can do 10 to 15 repairs in a day.
two different things.
Please recognize that
When you think your gas cutting burner is broken
When you think your gas cutting burner is broken.
In many cases, you are mistaken.
The gas has stopped flowing.
This is a common case.
There are two reasons why the gas stops flowing.
These two are by far the most common.
If you feel that your gas banner is faulty?
First, replace the Gas Nozzle and the gas apollo cock.
Grating the valves
It’s not that difficult to match up the valves.
It’s not that difficult.
In the hole of the cutting gas burner body
and adjust by rubbing together with compound.
But for personal use, a lathe is not necessary.
Grating of needle valve
To grind the needle valve
Remove the injector from inside the mixing valve.
Grind it against the new needle valve.
Just use a compound.
silver brazing
Silver brazing is easy because it blends well with brass.
Some people think it’s too difficult.
But it is not that difficult.
Even stainless steel can be polished roughly.
Silver brazing can be done with a cassette gas burner.
Silver brazing can also be done with a cassette gas burner.
Polish it well.
Apply silver brazing flux
Heat it up to 630~800 degrees Celsius.
silver brazing fill the holes with silver brazing .
Soldering
Soldering is not that difficult.
It depends on the model of the gas burner.
If the handle is brass, the base of the handle (top and bottom) is soldered on.
Soldering temperature is about 250 degrees.
Just polish it well.
Just pour in the solder and you’re good to go.
But all jobs are quick and easy.
But please understand that every job has its own tips and tricks.
Do you think it’s difficult?
What’s so annoying about that?
Because it’s a pain in the ass.
I’m scared.
for that reason
You try to ask a repairman to do it for you.
It’s just that they don’t know how to do it.
Think about how you were able to do gas cutting before.
What happened before you were able to cut the gas?
Before you were able to do gas cutting, what did you do?
To light the gas.
You didn’t know how to gas cut steel.
You must have had a hard time knowing when to burn it.
It’s exactly the same.
Once you’ve experienced it.
It’s easy to change from difficult to easy.
Psychological
People are obsessed with psychological effects.
We hear from our customers that
They say, “Gas is dangerous.
It’s just an imprint.
Make sure there are no accidents with the gas.
It’s just psychologically imprinted on us.
Really, if it was something dangerous. If it were truly dangerous, it would be compensated with strict qualifications and preferential pay. compensation.
Legal inspection of gas burner
Gas appliances and business equipment
gas appliances and commercial equipment must be inspected once every three years after manufacture.
gas appliances and commercial equipment.
You don’t need to have any special qualifications, but it is better if you have a gas handling training course, a chief gas handler, or a gas handling supervisor.
You do not need to have any special qualifications, but it is better if you have gas handling training, a gas handling supervisor, and a gas handling supervisor.
The structure and repair of gas burners can be found on our blog.
It is possible to repair a gas burner using only those skills.
You’re making money off of such a simple thing!
If you are thinking
Please give it a try.
It’s a niche repair that no one else does.
We receive a living wage.
We don’t charge as much for repairs as we do for general repairs.
We don’t charge much more than general repairs.
are two different things.
Please recognize that
